LPIC-1 EXAM 101, PART 1 OF 2, VERSION 5.0 FREE DOWNLOAD PDF & 101-500 REAL PRACTICE TORRENT

LPIC-1 Exam 101, Part 1 of 2, version 5.0 free download pdf & 101-500 real practice torrent

LPIC-1 Exam 101, Part 1 of 2, version 5.0 free download pdf & 101-500 real practice torrent

Blog Article

Tags: Frenquent 101-500 Update, 101-500 Reliable Dumps Sheet, 101-500 Test Sample Online, Latest 101-500 Test Format, Standard 101-500 Answers

If someone who can pass the exam, they can earn a high salary in a short time. If you decide to beat the exam, you must try our 101-500 exam torrent, then, you will find that it is so easy to pass the exam. You only need little time and energy to review and prepare for the exam if you use our 101-500 prep torrent as the studying materials. So it is worthy for them to buy our 101-500 learning prep. We provide the free demo of our 101-500 training guide so as to let you have a good understanding of our 101-500 exam questions before your purchase.

Topics of LPIC-1 Linux Administrator , 101-500 Exam

To know course content so that aspirants can prepare for exam is a must. LPIC-1, 101-500 exam will include following topics :

1. System Architecture

  • Tools and utilities to manipulate USB devices.

  • Determine and configure hardware settings

  • Awareness of acpid.

  • Change runlevels / boot targets and shutdown or reboot system

  • Check boot events in the log files.

  • Demonstrate knowledge of the boot sequence from BIOS/UEFI to boot completion.

  • Enable and disable integrated peripherals.

  • Awareness of Upstart.

  • Change between runlevels / boot targets including single user mode.

  • Boot the system

  • Determine hardware resources for devices.

  • Differentiate between the various types of mass storage devices.

  • Properly terminate processes.

  • Shutdown and reboot from the command line.

2. Linux Installation and Package Management

  • Perform basic configuration changes for GRUB 2.

  • Determine what files a package provides, as well as find which package a specific file comes from.

  • Tailor the design to the intended use of the system.

  • Use RPM and YUM package management

  • Interact with the boot loader.

  • Linux as a virtualization guest

  • Obtain information on RPM packages such as version, status, dependencies, integrity and signatures.

  • Install, upgrade and uninstall Debian binary packages.

  • Install and configure a boot loader such as GRUB Legacy.

  • Awareness of cloud-init.

  • Design hard disk layout

  • Awareness of apt.

  • Identify the typical locations of system libraries.

  • Ensure the /boot partition conforms to the hardware architecture requirements for booting.

  • Understand unique properties of a Linux system which have to changed when a system is cloned or used as a template.

  • Find packages containing specific files or libraries which may or may not be installed.

  • Understand Linux extensions which integrate Linux with a virtualization product.

  • Knowledge of basic features of LVM.

  • Load shared libraries.

  • Providing alternative boot locations and backup boot options.

  • Identify shared libraries.

  • Manage shared libraries

  • Allocate filesystems and swap space to separate partitions or disks.

  • Install a boot manager

  • Understand the general concept of virtual machines and containers.

  • Obtain package information like version, content, dependencies, package integrity and installation status (whether or not the package is installed).

  • Use Debian package management

  • Install, re-install, upgrade and remove packages using RPM, YUM and Zypper.

  • Understand how system images are used to deploy virtual machines, cloud instances and containers.

  • Awareness of dnf.

3. GNU and Unix Commands

  • Basic file editing

  • Understand the concepts of special characters, character classes, quantifiers and anchors.

  • Send text files and output streams through text utility filters to modify the output using standard UNIX commands found in the GNU textutils package.

  • Pipe the output of one command to the input of another command.

  • Understand and use vi modes.

  • Navigate a document using vi.

  • Send output to both stdout and a file.

  • Change the priority of a running process.

  • Know the default priority of a job that is created.

  • Configure the standard editor.

  • Awareness of Emacs, nano and vim.

  • Copy, move and remove files and directories individually.

  • Process text streams using filters

  • Use single shell commands and one line command sequences to perform basic tasks on the command line.

  • Use regular expression tools to perform searches through a filesystem or file content.

  • Search text files using regular expressions

  • Send signals to processes.

  • Modify process execution priorities

  • Work on the command line

  • Insert, edit, delete, copy and find text in vi.

  • Use and edit command history.

  • Remove files and directories recursively.

  • Run jobs in the foreground and background.

  • Signal a program to continue running after logout.

  • Select and sort processes for display.

  • Redirecting standard input, standard output and standard error.

  • Understand the differences between basic and extended regular expressions.

  • Create, monitor and kill processes

  • Use streams, pipes and redirects

  • Using find to locate and act on files based on type, size, or time.

  • Use simple and advanced wildcard specifications in commands.

  • Use regular expressions to delete, change and substitute text.

  • Create simple regular expressions containing several notational elements.

  • Copy multiple files and directories recursively.

  • Use the output of one command as arguments to another command.

4. Devices, Linux Filesystems, Filesystem Hierarchy Standard

  • Use the group field to grant file access to group members.

  • Use of labels and UUIDs for identifying and mounting file systems.

  • Find files and commands on a Linux system.

  • Configure filesystem mounting on bootup.

  • Create and change hard and symbolic links

  • Create partitions and filesystems

  • Use access modes such as suid, sgid and the sticky bit to maintain security.

  • Identify hard and/or soft links.

  • Basic feature knowledge of Btrfs, including multi-device filesystems, compression and subvolumes.

  • Know the location and purpose of important file and directories as defined in the FHS.

  • Maintain the integrity of filesystems

  • Manage file permissions and ownership

  • Verify the integrity of filesystems.

  • Use links to support system administration tasks

  • Awareness of systemd mount units.

  • Find system files and place files in the correct location

  • Configure user mountable removable filesystems.

  • VFAT

  • Manage access permissions on regular and special files as well as directories.

Lpi 101-500 Exam, also known as the LPIC-1 Exam 101, Part 1 of 2, version 5.0 is a certification exam designed to test the knowledge and skills of individuals who want to pursue a career in Linux administration. 101-500 exam is ideal for beginners who want to learn the basics of Linux and those who want to validate their skills in this area. The LPIC-1 certification is a popular choice for IT professionals who want to demonstrate their expertise in Linux administration.

>> Frenquent 101-500 Update <<

101-500 Reliable Dumps Sheet, 101-500 Test Sample Online

DumpsMaterials Lpi 101-500 Dumps are an indispensable material in the certification exam. It is no exaggeration to say that the value of the certification training materials is equivalent to all exam related reference books. After you use it, you will find that everything we have said is true.

Lpi LPIC-1 Exam 101, Part 1 of 2, version 5.0 Sample Questions (Q218-Q223):

NEW QUESTION # 218
In order to display all currently mounted filesystems, which of the following commands could be used?
(Choose TWO correct answers.)

  • A. mount
  • B. lsmounts
  • C. cat /proc/filesystems
  • D. cat /proc/self/mounts
  • E. free

Answer: A,D

Explanation:
Explanation
The correct commands to display all currently mounted filesystems are cat /proc/self/mounts and mount.
The cat /proc/self/mounts command reads the contents of the /proc/self/mounts file, which is a symbolic link to /proc/mounts. This file contains information about all the filesystems that are currently mounted on the system, as reported by the kernel. The mount command without any arguments shows all the mounted filesystems, as recorded by the mount and umount commands. The other options are incorrect because they do not display the mounted filesystems. The free command shows the amount of free and used memory in the system. The lsmounts command is not a standard Linux command. The cat /proc/filesystems command shows the filesystem types that are supported by the kernel. References:
* [LPI Linux Essentials - 2.2 Mounting, Unmounting Filesystems]
* How to get the complete and exact list of mounted filesystems in Linux? - Unix & Linux Stack Exchange
* 4 Commands to List Mounted File Systems in Linux - Linux Shell Tips
* How To Show Mounted Devices In Linux Operating System
* How to Check if a Filesystem is Mounted in Linux?


NEW QUESTION # 219
During a system boot cycle, what is the program that is run after the BIOS completes its tasks?

  • A. The bootloader
  • B. The init program
  • C. The inetd program
  • D. The kernel

Answer: A


NEW QUESTION # 220
Which file should be edited to select the network locations from which Debian installation package files are loaded?

  • A. /etc/dpkg/dpkg.cfg
  • B. /etc/apt/sources.list
  • C. /etc/dpkg/dselect.cfg
  • D. /etc/apt/apt.conf.d
  • E. /etc/apt/apt.conf

Answer: B

Explanation:
Explanation
The /etc/apt/sources.list file is the main configuration file for the Advanced Package Tool (apt), which is used to manage Debian installation package files. This file contains a list of repositories, or sources, from which apt can download and install packages. Each repository is specified by a line that has the following format:
type uri suite [component1] [component2] [...]
Where:
* type is the access method, such as http, ftp, file, etc.
* uri
is the Uniform Resource Identifier (URI) of the repository, such as http://deb.debian.org/debian
* suite is the distribution code name or archive name, such as stable, testing, unstable, etc.
* component is an optional section of the repository, such as main, contrib, non-free, etc.
For example, a typical sources.list file for Debian stable could look like this:
deb
http://deb.debian.org/debian stable main contrib non-free deb-src http://deb.debian.org/debian stable main contrib non-free deb
http://deb.debian.org/debian-security/ stable/updates main contrib non-free deb-src
http://deb.debian.org/debian-security/ stable/updates main contrib non-free deb
http://deb.debian.org/debian stable-updates main contrib non-free deb-src http://deb.debian.org/debian stable-updates main contrib non-free The first two lines specify the main repository for Debian stable, with both binary (deb) and source (deb-src) packages. The next two lines specify the security updates repository for Debian stable, which contains important security fixes. The last two lines specify the stable-updates repository, which contains packages that have been updated after the release of Debian stable.
By editing the /etc/apt/sources.list file, one can select the network locations from which Debian installation package files are loaded. However, it is recommended to use a graphical or command-line tool, such as aptitude or synaptic, to manage the sources.list file, as they can handle the syntax and avoid errors.
References:
* 1, 102.4 Lesson 1
* 2, 102.4 Use Debian package management
* man sources.list


NEW QUESTION # 221
Which command shows all shared libraries required by a binary executable or another shared library? (Specify ONLY the command without any path or parameters.)

Answer:

Explanation:
ldd
Explanation
The command that shows all shared libraries required by a binary executable or another shared library is ldd.
This command queries the dynamic linker to find out which libraries are needed by the given file and displays them on the standard output. For example, to see the shared libraries required by the /bin/ls program, we can run:
ldd /bin/ls
The output will look something like this:
linux-vdso.so.1 (0x00007ffd8a7f6000)libselinux.so.1 => /lib/x86_64-linux-gnu/libselinux.so.1 (0x00007f0c5a6c4000)libc.so.6 => /lib/x86_64-linux-gnu/libc.so.6 (0x00007f0c5a4d3000)libpcre2-8.so.0 =>
/usr/lib/x86_64-linux-gnu/libpcre2-8.so.0 (0x00007f0c5a445000)libdl.so.2 => /lib/x86_64-linux-gnu/libdl.so.2 (0x00007f0c5a441000)/lib64/ld-linux-x86-64.so.2 (0x00007f0c5a8a5000)libpthread.so.0 =>
/lib/x86_64-linux-gnu/libpthread.so.0 (0x00007f0c5a41e000)
The output shows the name and the path of each shared library, as well as the address where it is loaded in memory. If the library is not found, the output will show not found instead of the path. The linux-vdso.so.1 library is a special case, as it is a virtual library that is not actually present on the filesystem, but is injected by the kernel into every process12.
References:
* How to Show All Shared Libraries Used by Executables in Linux? - Baeldung
* How to show all shared libraries used by executables in Linux? - Stack Overflow


NEW QUESTION # 222
Which of the following signals is sent to a process when the key combination Ctrl+Z is pressed on the keyboard?

  • A. SIGSTOP
  • B. SIGTERM
  • C. SIGINT
  • D. SIGKILL
  • E. SIGCONT

Answer: A


NEW QUESTION # 223
......

In the information society, everything is changing rapidly. In order to allow users to have timely access to the latest information, our 101-500 real exam has been updated. Our update includes not only the content but also the functionality of the system. The content of the 101-500 training guide is the real questions and answers which are always kept to be the latest according to the efforts of the professionals. And we apply the newest technologies to the system of our 101-500 exam questions.

101-500 Reliable Dumps Sheet: https://www.dumpsmaterials.com/101-500-real-torrent.html

Report this page